Tektronix, National Semiconductor,
Motorola, Altera, Xilinx, IDT, Texas Instruments, Lattice Semiconductor, LSI,
Allen Bradley, AMD, Analog Devices, Bourns, Clarostat, Corcom, Cornell Dubilier,
Cypress, Dale, Vishay, Kemet, AVX, Dallas, Fairchild, Harris, Hitatchi, Intel,
Interfet, Intersil, Linear Tech, Lumileds, Luxeon, Microsemi, ON Semiconductor,
Maxim, Nichicon, NMB, Panaflo, Comair Rotron, Nidec, HP, Pulse Engineering, Signetics,
Siliconix, SGS Thompson, Sprague, TDK, Switchcraft, Raytheon, ZMAN Magnetics,
and many more.
$20.00 Minimum - $15.00 merchandise $5.00 Shipping/Handling
EFFECTIVE 5/5/05 - NEW HOURS: MON-FRI 12 NOON TILL 12 MIDNIGHT PACIFIC TIME WEST COAST USA
click here to see our ebay auctions featuring one of a kind, rare items that never make it on our web site
NEW SHIPMENT JUST ARRIVED
BLACK 12" PERFORATED CIRCUIT BOARDS
PERFECT FOR MAKING YOUR OWN LED LIGHT STRIPS
FOR 1/2 THE COST OF PRE-MADE UNITS
TOP QUALITY FRP DYED BLACK
PERFECT NO GLARE LED MOUNTING WITHOUT THE HASSLES OF PAINTING YOUR CIRCUIT BOARDS
easily cut with a hack saw if you want to cut it into smaller individual pieces
PERFECT FOR SOLAR POWER USERS
AS THE TYPICAL DRAW WITH 12 LEDS IS ONLY 80 MILLIAMPS AT 12 VOLTS DC
shown below with 12 white 5mm - 8000,- 10,000mcd leds
leds not included
12" x 11/16" plated one side perf boards - black
part # 12pcbb - $5.00 each plus shipping
6 for $18.00 plus shipping
1.5 WATT STARFISH UFO'S - Quickar Exclusive Product
55 lumens 10.5vdc 150ma ( white)
WAS $9.95 - NOW ONLY $7.00 EACH - QTYS LTD
60 PIECES WHITE AVAILABLE
1.5 WATT WHITE STARFISH UFO LEDS
IN AN MR-16 BULB BI-PIN BASE 12-13.2 VOLTS AC OR DC
ONLY $12.95 EACH
55 lumens 12-13.2 volts ac or dc
EXTRA SPECIAL ONCE IN A LIFETIME BELOW COST
HUGE SPECIAL ON AMBER PIRANHA (aka SUPER FLUX or SPIDER LEDS)
We are helping out a major manufacturer who had a customer change circuit designs, and left him hanging with
Over 200,000 pieces available
Brand New Prime Quality Leds are here in the USA, ready for delivery.
These LED are selected per wavelength (+/-3nm tolerance) and intensity.
Packaged in tubes of 60
589-591nm 1.3 lumens at
2vdc @ 70ma max drive current
Click here for complete spec sheets
List price was $.67 each
Wholesale price was 33 cents each
Manufacturers dead net cost to manufacture was 13 cents each !
BLOW OUT - BELOW COST - PRICED AT
10 CENTS EACH IN 120 PIECE LOTS - (MINIMUM ORDER)
9 CENTS EACH IN 1200 PIECE LOTS
8 CENTS EACH IN 12,000 PIECE LOTS*
7.5 CENTS EACH IN 120,000 PIECE LOTS*
TAKE ALL 200,000 AT 6.5 CENTS EACH*
FOB EAST COAST USA *
If you have questions or would like to place an order
BRAND NEW PRODUCT - QUICKAR ELECTRONICS EXCLUSIVE
DESIGNED IN COOPERATION WITH DIGITRONICS R & D
75 watts per channel - 3 CHANNEL PWM CONTROLLER KITS
for high powered leds like 1watt 3watt and 5 watt Luxeon Stars and other high powered leds
THE PERFECT CONTROLLER FOR RGB ( red green blue) FULL COLOR CONTROL OF LEDS
LIKE OUR NEW 1 WATT RGB UFO LEDS - 3 COLORS IN ONE LED !
COMBINED WITH THIS 3 CHANNEL PWM CONTROLLER KIT
YOU CAN HAVE 24 MILLION COLORS
AT YOUR DISPOSAL
print("\n"); ?>CLICK HERE TO ORDER!
3 CHANNEL PWM CONTROLLER KITS $24.95 EACH
FULLY ASSEMBLED AND TESTED (LIMITED TIME ONLY) $29.95
Kits contain all parts, instructions, schematic diagram
You will have to follow the assembly instructions and solder the parts onto the supplied circuit board, and provide a suitable power source ( like an inexpensive "Wall Wart" type ac to dc transformer)
RATED FOR 75 WATTS PER CHANNEL
and that's without any heatsinks or forced air cooling which would dramatically increase the ratings
see the notes below from Michael the Chief Design Engineer:
Ran Two Units near 24hrs each yesterday, No Drama! With 17Vdc Input And 9.0Amps Output! (3amps per channel)
((NO Customer "Wall-Wart" Can Supply over a couple amps!)) Equating to 150Watts Total Control, Or 50Watts Per Channel, Without any heatsinks needed or overload.
This is consistent with the Data Specifications for The IRF 530 TMOS Power
Output FET supplied in each kit. IRF 530's are rated for a max.
"Package Dissipation" of 75Watts each and show ratings of
100V @ 14Amps. continuous, Drain/Source @ 56Amps. Peak!
Actually the LIST PRICE of the "FET's & Precision Bourns Pots" Supplied in each Kit Exceeds $25.00 WOW!!
(And Of Course The Most Expensive Part IS..... The Ckt. Board!!!)
No one else would attempt to sell a $40 Kit for $24.95, it's just Crazy!
Thank you Michael, Yes, we are CRAZY ABOUT LOW PRICES, GOOD BARGINS, AND STATE OF THE ART , CUSTOM MADE PRODUCTS AVAILABLE NOWHERE ELSE!
( and selling like crazy - 100+ units per month - some people have came back and bought em 3 at a time)
OUR VERY AFFORDABLE 20 WATT SINGLE CHANNEL PWM CONTROLLER KIT
ONLY $9.95 EACH
MORE NEW ELECTRONC KITS
FROM QUICKAR ELECTRONICS
( please note these are kits and you will have to put the right parts in the right places and solder them together and provide a power source)
ML807 - Variable Power Supply
adjustable from 0-12VDC @ 500ma ( shown assembled)
PERFECT FOR THOUSANDS OF ELECTRONIC PROJECTS AND ITEMS
• A basic regulator that can be considered as a best buy power supply
• Adjustment through variable resistor or normal volume control.
• Power supply : any 120vac to 12vdc 500ma or less transformer will work (not included)
• PCB dimensions : 1.3” X 1.2”
ML915 - LOW VOLTAGE BATTERY ALERT (shown assembled)
• Lets you know when your battery is getting weak and needs to be recharged by an audible alarm
. Perfect for boats, cars, solar panels, rechargeable batteries, etc...
• This circuit can be adjusted 7.8-12 volt by adjusting at variable resistance.
• Normally 10 volt adjustment is suggested for 12 volt battery.
• PCB dimensions : 1.9” X 1.5”
ML148 - 4 WAY 3 COLOR TRAFFIC LIGHT KIT
Traffic light 4 way 12 LEDs is running light circuit.
• The shape is the same traffic light at the intersection.
• This circuit is consist of 12 LEDs.
LEDS CAN BE EXTERNALLY MOUNTED AWAY FROM THE BOARD IF DESIRED BY JUST RUNNING SOME EXTRA WIRING
• Idea as light-shows for model construction etc.
• Power supply : 9-12 VDC.(not included)
• PCB dimensions : 1.3” X 3.6”
$10.95 iNCLUDES 12 - 5MM LEDS ( ADD $2.00 FOR 12 - 2MM OR 3MM LEDS )
ML144 DC CHASING LIGHT 6 PROGRAM (4CH. 12V. 100W.)
• This circuit requires a 12 vdc power supply ( not included)
6 DIFFERENT PATTERNS/ FUNCTIONS:
1......light run from 1st to 4th ranking and then return from 4th to 1st again after all lamp is light on.
2 .....light runs from 1st to 4th after all lamp is light on.
3 .....flash light runs between 1st , 3rd, and 2nd, 4th.
4. .....light runs from 1st to 4th and then return from 4th to 1st again.
5. .....light runs from 1st to 4th ranking and then return from 4th to 1st again after all lamp is light off.
6. .....light runs from 1st to 4th ranking and restarts at 1st ranking again.
Led indicators for channel on indication -
• This circuit can power 25Watts of incandescent bulbs or LEDS ( not included) per each channels of 4 total channels for a total 100-Watts maximum.
• PCB dimensions : 3.5” X 2.7”